Vertical pumps for wet sumps with a radial or diagonal
impeller. Designed with a by-pass shaft or discharge casing from the spiral
cabinet.
Vertical pumps for wet sumps with a by-pass shaft. The product line is manufactured with a radial or diagonal impeller. One or more impellers. Pump bearings of small parameters are lubricated with grease. Pump bearings of large parameters are lubricated with oil. Seal chamber is designed for installation of a compressed seal. Guide shaft sleeves are lubricated with a pumped medium.
Technical specfications
Q max = 10 000 m3/h
H max = 320 m
T max = 210 °C
Application
The pumps are used for pumping process water, river water,
utility and polluted waste water. Installed in water supply systems, cooling
systems in power plants and industrial water circulation. Pumping water from
deep sumps. The encased shaft and guide sleeves versions are used to pump water
and suspensions with a higher content of solid particles.
Modification
Encased shaft for external flushing / lubrication of guide
sleeves
Cooled/heated oil filling of the bearing bracket
Device to prevent reverse rotation of the machine
Vertical pump CV4
Vertical, radially split single-stage pump with axial inlet
and radial impeller for installation in wet sumps. Pump design is in accordance
with API 610-VS4. Bearings are lubricated with grease. Seal chamber designed
for the installation of mechanical cassette seals according to API 682. Guide
shaft sleeves are lubricated with a pumped medium.
API 610/ISO 13709, EU directive ATEX 2014/34/EU, ISO 5199
Technical specfications
Q max = 350 m3/h
H max = 110 m
T max = 150 °C
Application
Pump are used in chemical and petrochemical plants, power
plants, as well as for transporting water and contaminated water. They are part
of the installations in closed tanks or open sumps. Widely used in cracking
systems, for pumping of the process residues and waste products. Used for
pumping aggressive media.
Modification
External flushing / lubrication of guide sleeves
Heated structure