Horizontal, lever, radially split single-stage pump
with axial inlet and radial impeller. Designed for removal of the rotor
assembly with the bearing bracket without disrupting the flange connections of
the suction and discharge flanges. Basic version is with closed impeller and
grease lubrication. Seal chamber are designed for installation of compressed
seals, mechanical seals, folded or cassette structures, including the
installation of a double seal.
ISO 5199, EU directive ATEX 2014/34/EU
Technical specfications
Q max = 1700 m3/h
H max = 140 m
T max = 180 °C
Application
The pump is used in basic pumping applications for
water, chemical or volatile media, demanding/heavy duty chemical and
petrochemical plants and power plants. Pumping low-percentage suspensions, in
the food industry and biofuel production. Suitable for high temperature media
not exceeding 160 °C.
Modification
Semi-open or open impeller
Oil lubrication
Cooled / heated seal chamber
Cooled / heated casing of the bearing console
Seals according to API682
Inducer
Pedestal pump CS2
Horizontal, radially split single-stage pump with
axial inlet and radial impeller. Cantilever design with pump in shaft axis.
Designed for removal of the rotor assembly with the bearing bracket without
disrupting the flange connections of the suction and discharge flanges. Pump
design is in accordance with API 610-OH2. Bearings are lubricated with oil
bath. Seal chambre is designed for the installation of mechanical cassette
seals according to API 682. Bearing bracket is equipped with ribs for
intensifying heat transfer.
API 610/ISO 13709, ISO 5199, EU directive ATEX
2014/34/EU
Technical specfications
Q max = 4500 m3/h (@ 50 Hz)
H max = 360 m (@ 50 Hz)
T max = 450 °C
Application
Pumps are used in the most demanding chemical and petrochemical plants and power plants. It is a typical pump for use in cracking systems. Designed for high temperature media up to 450 °C.
Modification
Additional fan/ventilator for the bearing console
Cooled / heated seal chamber
Cooled / heated casing of the bearing console
Inducer
Pedestal pump CS3
Vertical, radially split pump with closed radial impeller.
„IN-LINE“ design. Designed with bearing bracket or impeller shaft is directly
connected to the electric motor shaft. The product line is manufactured with a
standard impeller or dual-flow impeller concept. Grease lubrication. Seal
chamber designed for installation of compressed seals, mechanical seals, folded
or cassette structures, including the installation of a double seal.
ISO 5199, EU directive ATEX 2014/34/EU
Technical specfications
Q max = 380 m3/h
H max = 150 m
T max = 120 °C
Application
The pumps are used in plants with a complex layout due to
minimal floor space. Closed cooling systems in power plants, remote heating,
industrial water circulation, pumping water or mildly aggressive media and
other media.
Modification
Bearing bracket design
Pump shaft connected directly to the motor
Dual flow impeller